<center id="mgs1w"><div id="mgs1w"></div></center>
<option id="mgs1w"><samp id="mgs1w"></samp></option>
  • <track id="mgs1w"></track>
  • <bdo id="mgs1w"></bdo>

    1. <track id="mgs1w"><track id="mgs1w"></track></track>
      • ban

      Copyright ? 2018 重慶翔睿捷自動化設備股份有限公司 版權所有 渝ICP備19013604號-1   網站建設:中企動力 重慶

      >
      >
      拉索裝配生產流水線
      瀏覽量
      產品名稱

      拉索裝配生產流水線

      編號
      XRJ-008
      所屬分類
      重量
      0.00
      零售價
      0.00
      市場價
      ¥0.00
      數量
      -
      +
      庫存
      0
      沒有此類產品
      產品描述
      一.總體理念
       
      滿足單根和雙根推拉索的裝配要求(產品和工藝)
       
      每個工位采用人工手動喂料,人工出料,工位與工位之間采用不銹鋼槽式懸掛滑槽交替輸送
       
       生產線采用單件流動原則,工位與工位之間按1-5件緩存設計.
       
       生產線總共設計10個工位(含包裝),每個工位基本平衡,工位時間節拍為20S/套,每天8小時產量為1440套.
       
      對易錯裝,漏裝,和反裝的零件,適當應用防錯技術,對其進行防錯監控.
       
      每個工序完成,人工對相應的裝配特性(錯漏裝,是否到位,運轉性能等)進行自檢,并作相應標記 
       
      終檢設置外觀檢測臺:對易錯漏裝的零件,外觀件,產品性能等項目人工再次確認。 
       
       按流程進行不合格品控制,質量管理,工藝管理.
       
      適當應用設備管理,安全,人機工程,快速換模換線,外觀等技術
       . general idea

       

      Meet the assembly requirements of single and double push cables (products and processes)

       

      Each station adopts manual feeding and manual discharging, and the stainless steel groove hanging chute is used for alternating conveying between stations

       

      The production line adopts the principle of single piece flow, and the buffer design between stations is 1-5 pieces.

       

      The production line is designed with a total of 10 stations (including packaging), each station is basically balanced, the time tempo of each station is 20S/ set, and the output is 1440 sets per 8 hours per day.

       

      Proper application of error-proof technology to the parts that are easy to be misfitted, misfitted, and backloaded, and error-proof monitoring shall be carried out.

       

      After the completion of each process, the corresponding assembly characteristics (wrong and missing installation, whether in place, operation performance, etc.) should be manually self-checked and marked accordingly

       

      Final inspection set up appearance testing platform: manually confirm the parts, appearance parts, product performance and other items that are easy to be installed by mistake or omission. 

       

      According to the process of non - conforming product control, quality management, process management.

       

      Appropriate application of equipment management, safety, ergonomics, rapid change of die line, appearance and other technologies

      未找到相應參數組,請于后臺屬性模板中添加
      暫未實現,敬請期待
      暫未實現,敬請期待
      上一篇
      下一篇
      80岁老熟妇乱子伦牲交_大学生囗交口爆吞精在线视频_欧洲无码激情av免费看_自慰网站_亚洲综合区激情区小说区