<center id="mgs1w"><div id="mgs1w"></div></center>
<option id="mgs1w"><samp id="mgs1w"></samp></option>
  • <track id="mgs1w"></track>
  • <bdo id="mgs1w"></bdo>

    1. <track id="mgs1w"><track id="mgs1w"></track></track>
      • ban

      Copyright ? 2018 重慶翔睿捷自動化設備股份有限公司 版權所有 渝ICP備19013604號-1   網站建設:中企動力 重慶

      >
      >
      座椅泡沫開孔機
      瀏覽量
      產品名稱

      座椅泡沫開孔機

      編號
      XRJ-007
      所屬分類
      重量
      0.00
      零售價
      0.00
      市場價
      ¥0.00
      數量
      -
      +
      庫存
      0
      沒有此類產品
      產品描述
      2.1設備組成
      泡沫開孔生產線由真空開孔系統、機械碾壓系統和修補傳送帶控等組成。
      2.2工作原理
      ?真空開孔原理 
          泡沫產品放置于傳送帶上時,傳送帶自動將產品送入真空箱規定的位置,傳送帶停止,真空箱蓋下降到位,真空閥打開始抽真空,當達到設定的值后,停止抽真空并保持真空度一段時間,保持時間到達,開始釋放真空到指定真空度,繼而進行抽第二次真空,如此反復多次真空段(真空段次數可調)。完成最后次時釋放所有的真空,真空箱上升回位,傳送帶啟動運行,將產品送出真空箱,至此,該產品的真空開孔動作全部完成。
      ?機械碾壓原理
      泡沫產品放置于下層滾筒斜坡上,通過無動力斜坡滾筒傳送至下層傳送帶,下層輸送帶傳兩旁的無動力滾輪自動將產品位置調整到規定規范,并將產品送入碾壓區域,產品先通過第一段機械開孔碾壓,待產品完全經過第一段碾壓后,再進入第二段機械開孔碾壓,經過兩段碾壓后將產品送出。

      2.1 Equipment composition

      The foam hole opening production line is composed of vacuum hole opening system, mechanical rolling system and repairing conveyor belt control.

      2.2 Working Principle

      L Principle of vacuum opening

      Foam products placed on the conveyor belt, the conveyor belt automatically send products to the position of the chamber evacuation rules, the conveyor belt to stop, vacuum box cover fall in place, vacuum valve began pumping air into vacuum state, after reaching the set value, stop and keep the vacuum vacuum for a period of time, keep time, begins to release the vacuum to the specified vacuum, then carries on the second vacuum, so repeatedly vacuum adjustable number (vacuum).Release all the vacuums at the last time, the empty box rises and returns, the conveyor starts to run, and the product is sent out of the empty box. At this point, the vacuum opening action of the product is completed.

      L Mechanical rolling principle

      Foam products are placed in the lower roller slopes and by unpowered slope transfer roller to the lower conveyor belt, the lower the unpowered roller automatically on both sides of the conveyor belt transmission products position adjustment to the rules, and the product into the roller compaction area, product by the first paragraph the machine first opening roller compaction, after being products completely after the first period of RCC, again into the second period of mechanical opening roller compaction, send the product after two rolling.

      未找到相應參數組,請于后臺屬性模板中添加
      暫未實現,敬請期待
      暫未實現,敬請期待
      上一篇
      下一篇
      80岁老熟妇乱子伦牲交_大学生囗交口爆吞精在线视频_欧洲无码激情av免费看_自慰网站_亚洲综合区激情区小说区